Working With Unix Processes

September 14, 2017 | Author: Anonymous CRJcPvcz | Category: Operating System Technology, Computer Architecture, System Software, Software, Computer Engineering
Share Embed Donate


Short Description

Working With Unix Processes...

Description

Working with Unix Processes Copyright © 2012 Jesse Storimer. All rights reserved. This ebook is licensed for individual use only. This is a one-man operation, please respect the time and effort that went into this book. If you came by a free copy and find it useful, you can compensate me at http://workingwithunixprocesses.com. Acknowledgements A big thank you to a few awesome folks who read early drafts of the book, helped me understand how to market this thing, gave me a push when I needed it, and were allaround extremely helpful: Sam Storry, Jesse Kaunisviita, and Marc-André Cournoyer. I have to express my immense gratitude towards my wife and daughter for not only supporting the erratic schedule that made this book possible, but also always being there to provide a second opinion. Without your love and support I couldn't have done this. You make it all worthwhile.

2

Contents 9

Introduction

23 Everything is a File

11

Primer

23 Descriptors Represent Resources

Why Care?

27 Standard Streams

11

12 Harness the Power!

28 In the Real World

12 Overview

28 System Calls

13 System Calls

18

21

Processes Have Resource Limits

14 Nomenclature, wtf(2)

29 Finding the Limits

16 Processes: The Atoms of Unix

30 Soft Limits vs. Hard Limits 31 Bumping the Soft Limit

Processes Have IDs 18 Cross Referencing

32 Exceeding the Limit

19 In the Real World

32 Other Resources

20 System Calls

33 In the Real World 34 System Calls

Processes Have Parents 21 Cross Referencing

23

29

35

Processes Have an Environment

22 In the Real World

36 It's a hash, right?

22 System Calls

37 In the Real World

Processes Have File Descriptors

37 System Calls

38

58 MRI / RBX users

Processes Have Arguments 38 It's an Array!

60

39 In the Real World 40

43

61 Babysitting 62 Process.wait and Cousins

Processes Have Names 40 Naming Processes

63 Communicating with Process.wait2

42 In the Real World

65 Waiting for Specific Children 66 Race Conditions

Processes Have Exit Codes 43 How to Exit a Process

47

56

68 In the Real World 68 System Calls

Processes Can Fork 47 Use the fork(2), Luke

53

Processes Can Wait

69

Zombie Processes

51 Multicore Programming?

69 Good Things Come to Those Who wait(2)

51 Using a Block

71 What Do Zombies Look Like?

52 In the Real World

71 In The Real World

52 System Calls

72 System Calls

Orphaned Processes

73

Processes Can Get Signals

53 Out of Control

73 Trapping SIGCHLD

54 Abandoned Children

75 SIGCHLD and Concurrency

54 Managing Orphans

78 Signals Primer

Processes Are Friendly 56 Being CoW Friendly

79 Where do Signals Come From? 80 The Big Picture

83 Redefining Signals

101 Process Groups and Session Groups

84 Ignoring Signals

106 In the Real World

84 Signal Handlers are Global

106 System Calls

85 Being Nice about Redefining Signals

89

Spawning Terminal Processes

87 When Can't You Receive Signals?

107 fork + exec

87 In the Real World

109 Arguments to exec

88 System Calls

114 In the Real World 116 System Calls

Processes Can Communicate 89 Our First Pipe

117

Ending

91 Pipes Are One-Way Only

117 Abstraction

91 Sharing Pipes

118 Communication

93 Streams vs. Messages

118 Farewell, But Not Goodbye

95 Remote IPC?

97

107

120

Appendix: How Resque Manages Processes

95 In the Real World

120 The Architecture

96 System Calls

121 Forking for Memory Management 123 Why Bother?

Daemon Processes 97 The First Process 98 Creating Your First Daemon Process

124 Doesn't the GC clean up for us? 126

Appendix: How Unicorn Reaps Worker Processes

99 Diving into Rack

126 Reaping What?

100 Daemonizing a Process, Step by Step

132 Conclusion

133

Appendix: Preforking Servers 134 1. Efficient use of memory 135 Many Mongrels 135 Many Unicorn 136 2. Efficient load balancing 138 3. Efficient sysadminning 138 Basic Example of a Preforking Server

141

Appendix: Spyglass 141 Spyglass' Architecture 142 Booting Spyglass 142 Before a Request Arrives 142 Connection is Made 143 Things Get Quiet 143 Getting Started

Updates • December 20, 2011 - First public version • December 21, 2011 - Typos • December 23, 2011 - Explanation for Process.setsid • December 27, 2011 - Section on SIGCHLD and concurrency • December 27, 2011 - Note about redefining 'default' signal handlers • December 28, 2011 - Typos • December 31, 2011 - Clarification around exiting with Kernel.raise; Section on using fork with a block; More typos; Note about getsid(2) • January 13, 2012 - Improved code highlighting. Improved e-reader formatting. • February 1, 2012 - New cover art. • February 7, 2012 - New chapters: zombie processes, environment variables, preforking servers, the spyglass project. Clarifications on CoW-friendliness in MRI. Added sections for IO.popen and Open3. • February 13, 2012 - Clarifications on Process::WNOHANG and file descriptor relations. • March 13, 2012 - Include TXT format. • March 29, 2012 - Formatting and errata. • April 20, 2012 - New chapters: ARGV and IPC. • May 15, 2012 - Clarification about reentrancy in signal handlers. 7

• June 12, 2012 - New chapter on rlimits; Many formatting/syntax updates.

8

Chapter 1

Introduction When I was growing up I was sitting in front of a computer every chance I got. Not because I was programming, but because I was fascinated by what was possible with this amazing machine. I grew up as a computer user using ICQ, Winamp, and Napster. As I got older I spent more time playing video games on the computer. At first I was into first-person shooters and eventually spent most of my time playing real-time strategy games. And then I discovered that you can play these games online! Throughout my youth I was a 'computer guy': I knew how to use computers, but I had no idea how they worked under the hood. The reason I'm giving you my background is because I want you to know that I was not a child prodigy. I did not teach myself how to program Basic at age 7. When I took my first computer programming class I was not teaching the teacher and correcting his mistakes. It wasn't until my second year of a University degree that I really came to love programming as an activity. Some may say that I'm a late bloomer, but I have a feeling that I'm closer to the norm than you may think. Although I came to love programming for the sake of programming itself I still didn't have a good grasp of how the computer was working under the hood. If you had told me back then that all of my code ran inside of a process I would have looked at you sideways.

9

Fortunately for me I was given a great work opportunity at a local web startup. This gave me a chance to do some programming on a real production system. This changed everything for me. This gave me a reason to learn how things were working under the hood. As I worked on this high-traffic production system I was presented with increasingly complex problems. As our traffic and resource demands increased we had to begin looking at our full stack to debug and fix outstanding issues. By just focusing on the application code we couldn't get the full picture of how the app was functioning. We had many layers in front of the application: a firewall, load balancer, reverse proxy, and http cache. We had layers that worked alongside the application: job queue, database server, and stats collector. Every application will have a different set of components that comprise it, and this book won't teach you everything there is to know about all of it. This book will teach you all you need to know about Unix processes, and that is guaranteed to improve your understanding of any component at work in your application. Through debugging issues I was forced to dig deep into Ruby projects that made use of Unix programming concepts. Projects like Resque and Unicorn. These two projects were my introduction to Unix programming in Ruby. After getting a deeper understanding of how they were working I was able to diagnose issues faster and with greater understanding, as well as debug pesky problems that didn't make sense when looking at the application code by itself. I even started coming up with new, faster, more efficient solutions to the problems I was solving that used the techniques I was learning from these projects. Alright, enough about me. Let's go down the rabbit hole. 10

Chapter 2

Primer This section will provide background on some key concepts used in the book. It's definitely recommended that you read this before moving on to the meatier chapters.

Why Care? The Unix programming model has existed, in some form, since 1970. It was then that Unix was famously invented at Bell Labs, along with the C programming language or framework. In the decades that have elapsed since then Unix has stood the test of time as the operating system of choice for reliability, security, and stability. Unix programming concepts and techniques are not a fad, they're not the latest popular programming language. These techniques transcend programming languages. Whether you're programming in C, C++, Ruby, Python, JavaScript, Haskell, or [insert your favourite language here] these techniques WILL be useful. This stuff has existed, largely unchanged, for decades. Smart programmers have been using Unix programming to solve tough problems with a multitude of programming languages for the last 40 years, and they will continue to do so for the next 40 years.

11

Harness the Power! I'll warn you now, the concepts and techniques described in this book can bring you great power. With this power you can create new software, understand complex software that is already out there, even use this knowledge to advance your career to the next level. Just remember, with great power comes great responsibility. Read on and I'll tell you everything you need to know to gain the power and avoid the pitfalls.

Overview This book is not meant to be read as a reference manual. It's more of a walkthrough. To get the most out of it you should read it sequentially, since each chapter builds on the last. Once you're finished you can use the chapter headings to find information if you need a refresher. This book contains many code examples. I highly recommend that you follow along with them by actually running them yourself in a Ruby interpreter. Playing with the code yourself and making tweaks will help the concepts sink in that much more. Once you've read through the book and played with the examples I'm sure you'll be wanting to get your hands on a real world project that's a little more in depth. At that point have a look at the included Spyglass project. Spyglass is a web server that was created specifically for inclusion with this book. It's designed to teach Unix programming concepts. It takes the concepts you learn here

12

and shows how a real-world project would put them to use. Have a look at the last chapter in this book for a deeper introduction.

System Calls To understand system calls first requires a quick explanation of the components of a Unix system, specifically userland vs. the kernel. The kernel of your Unix system sits atop the hardware of your computer. It's a middleman for any interactions that need to happen with the hardware. This includes things like writing/reading from the filesystem, sending data over the network, allocating memory, or playing audio over the speakers. Given its power, programs are not allowed direct access to the kernel. Any communication is done via system calls. The system call interface connects the kernel to userland. It defines the interactions that are allowed between your program and the computer hardware. Userland is where all of your programs run. You can do a lot in your userland programs without ever making use of a system call: do mathematics, string operations, control flow with logical statements. But I'd go as far as saying that if you want your programs to do anything interesting then you'll need to involve the kernel via system calls. If you were a C programmer this stuff would probably be second nature to you. System calls are at the heart of C programming. But I'm going to expect that you, like me, don't have any C programming experience. You learned to program in a high level language. When you learned to write data to the filesystem you weren't told which system calls make that happen. 13

The takeaway here is that system calls allow your user-space programs to interact indirectly with the hardware of your computer, via the kernel. We'll be looking at common system calls as we go through the chapters.

Nomenclature, wtf(2) One of the roadblocks to learning about Unix programming is where to find the proper documentation. Want to hear the kicker? It's all available via Unix manual pages (manpages), and if you're using a Unix based computer right now it's already on your computer! If you've never used manpages before you can start by invoking the command from a terminal.

man man

Perfect, right? Well, kind of. The manpages for the system call api are a great resource in two situations: 1. you're a C programmer who wants to know how to invoke a given system call, or 2. you're trying to figure out the purpose of a given system call I'm going to assume we're not C programmers here, so #1 isn't so useful, but #2 is very useful. You'll see references throughout this text to things like this: select(2). This bit of text is telling you where you can find the manpage for a given system call. You may or may not know this, but there are many sections to the Unix manpages.

14

Here's a look at the most commonly used sections of the manpages for FreeBSD and Linux systems: • Section 1: General Commands • Section 2: System Calls • Section 3: C Library Functions • Section 4: Special Files So Section 1 is for general commands (a.k.a. shell commands). If I wanted to refer you to the manual page for the find command I would write it like this: find(1). This tells you that there is a manual page for find in section 1 of the manpages. If I wanted to refer to the manual page for the getpid system call I would write it like this: getpid(2). This tells you that there is a manual page for getpid in section 2 of the manpages.

Why do manpages need multiple sections? Because a command may be available in more than one section, ie. available as both a shell command and a system call. Take stat(1) and stat(2) as an example.

In order to access other sections of the manpages you can specify it like this on the command line:

15

$ man 2 getpid $ man 3 malloc $ man find # same as man 1 find

This nomenclature was not invented for this book, it's a convention that's used everywhere 1 when referring to the manpages. So it's a good idea to learn it now and get comfortable with seeing it.

Processes: The Atoms of Unix Processes are the building blocks of a Unix system. Why? Because any code that is executed happens inside a process. For example, when you launch ruby from the command line a new process is created for your code. When your code is finished that process exits. $ ruby -e "p Time.now"

The same is true for all code running on your system. You know that MySQL server that's always running? That's running in its own process. The e-reader software you're using right now? That's running in its own process. The email client that's desperately trying to tell you you have new messages? You should ignore it by the way and keep reading! It also runs in its own process.

1.http://en.wikipedia.org/wiki/Man_page#Usage

16

Things start to get interesting when you realize that one process can spawn and manage many others. We'll be taking a look at that over the course of this book.

17

Chapter 3

Processes Have IDs Every process running on your system has a unique process identifier, hereby referred to as 'pid'. The pid doesn't say anything about the process itself, it's simply a sequential numeric label. This is how the kernel sees your process: as a number. Here's how we can inspect the current pid in a ruby program. Fire up

irb

and try this:

# This line will print the pid of the current ruby process. This might be an # irb process, a rake process, a rails server, or just a plain ruby script. puts Process.pid

A pid is a simple, generic representation of a process. Since it's not tied to any aspect of the content of the process it can be understood from any programming language and with simple tools. We'll see below how we can use the pid to trace the process details using different utilities.

Cross Referencing To get a full picture, we can use ps(1) to cross-reference our pid with what the kernel is seeing. Leaving your irb session open run the following command at a terminal:

18

$ ps -p

That command should show a process called 'irb' with a pid matching what was printed in the irb session.

In the Real World Just knowing the pid isn't all that useful in itself. So where is it used? A common place you'll find pids in the real world is in log files. When you have multiple processes logging to one file it's imperative that you're able to tell which log line comes from which process. Including the pid in each line solves that problem. Including the pid also allows you to cross reference information with the OS, through the use of commands like top(1) or lsof(1). Here's some sample output from the Spyglass server booting up. The first square brackets of each line denote the pid where the log line is coming from. [58550] [58550] [58557] [58557] [58558]

[Spyglass::Server] Listening on port 4545 [Spyglass::Lookout] Received incoming connection [Spyglass::Master] Loaded the app [Spyglass::Master] Spawned 4 workers. Babysitting now... [Spyglass::Worker] Received connection

19

System Calls Ruby's

Process.pid

maps to getpid(2).

There is also a global variable that holds the value of the current pid. You can access it with $$ . Ruby inherits this behaviour from other languages before it (both Perl and bash support $$ ), however I avoid it when possible. Typing out Process.pid in full is much more expressive of your intent than the dollar-dollar variable, and less likely to confuse those who haven't seen the dollar-dollar before.

20

Chapter 4

Processes Have Parents Every process running on your system has a parent process. Each process knows its parent process identifier (hereby referred to as 'ppid'). In the majority of cases the parent process for a given process is the process that invoked it. For example, you're an OSX user who starts up Terminal.app and lands in a bash prompt. Since everything is a process that action started a new Terminal.app process, which in turn started a bash process. The parent of that new bash process will be the Terminal.app process. If you then invoke ls(1) from the bash prompt, the parent of that ls process will be the bash process. You get the picture. Since the kernel deals only in pids there is a way to get the pid of the current parent process. Here's how it's done in Ruby: # Notice that this is only one character different from getting the # pid of the current process. puts Process.ppid

Cross Referencing Leaving your

irb

session open run the following command at a terminal: 21

$ ps -p

That command should show a process called 'bash' (or 'zsh' or whatever) with a pid that matches the one that was printed in your irb session.

In the Real World There aren't a ton of uses for the ppid in the real world. It can be important when detecting daemon processes, something covered in a later chapter.

System Calls Ruby's

Process.ppid

maps to getppid(2).

22

Chapter 5

Processes Have File Descriptors In much the same way as pids represent running processes, file descriptors represent open files.

Everything is a File A part of the Unix philosophy: in the land of Unix 'everything is a file'. This means that devices are treated as files, sockets and pipes are treated as files, and files are treated as files. Since all of these things are treated as files I'm going to use the word 'resource' when I'm talking about files in a general sense (including devices, pipes, sockets, etc.) and I'll use the word 'file' when I mean the classical definition (a file on the file system).

Descriptors Represent Resources Any time that you open a resource in a running process it is assigned a file descriptor number. File descriptors are NOT shared between unrelated processes, they live and die with the process they are bound to, just as any open resources for a process are 23

closed when it exits. There are special semantics for file descriptor sharing when you fork a process, more on that later. In Ruby, open resources are represented by the IO class. Any IO object can have an associated file descriptor number. Use IO#fileno to get access to it.

passwd = File.open('/etc/passwd') puts passwd.fileno

outputs: 3

Any resource that your process opens gets a unique number identifying it. This is how the kernel keeps track of any resources that your process is using. What happens when we have multiple resources open?

24

passwd = File.open('/etc/passwd') puts passwd.fileno hosts = File.open('/etc/hosts') puts hosts.fileno

# Close the open passwd file. The frees up its file descriptor # number to be used by the next opened resource. passwd.close null = File.open('/dev/null') puts null.fileno

outputs: 3 4 3

There are two key takeaways from this example. 1. File descriptor numbers are assigned the lowest unused value. The first file we opened, passwd , got file descriptor #3, the next open file got #4 because #3 was already in use. 2. Once a resource is closed its file descriptor number becomes available again. Once we closed the passwd file its file descriptor number became available again. So when we opened the file at dev/null it was assigned the lowest unused value, which was then #3. 25

It's important to note that file descriptors keep track of open resources only. Closed resources are not given a file descriptor number. Stepping back to the kernel's viewpoint again this makes a lot of sense. Once a resource is closed it no longer needs to interact with the hardware layer so the kernel can stop keeping track of it. Given the above, file descriptors are sometimes called 'open file descriptors'. This is a bit of misnomer since there is no such thing as a 'closed file descriptor'. In fact, trying to read the file descriptor number from a closed resource will raise an exception: passwd = File.open('/etc/passwd') puts passwd.fileno passwd.close puts passwd.fileno

outputs: 3 -e:4:in `fileno': closed stream (IOError)

You may have noticed that when we open a file and ask for its file descriptor number the lowest value we get is 3. What happened to 0, 1, and 2?

26

Standard Streams Every Unix process comes with three open resources. These are your standard input (STDIN), standard output (STDOUT), and standard error (STDERR) resources. These standard resources exist for a very important reason that we take for granted today. STDIN provides a generic way to read input from keyboard devices or pipes, STDOUT and STDERR provide generic ways to write output to monitors, files, printers, etc. This was one of the innovations of Unix. Before STDIN existed your program had to include a keyboard driver for all the keyboards it wanted to support! And if it wanted to print something to the screen it had to know how to manipulate the pixels required to do so. So let's all be thankful for standard streams. puts STDIN.fileno puts STDOUT.fileno puts STDERR.fileno

outputs: 0 1 2

That's where those first 3 file descriptor numbers went to.

27

In the Real World File descriptors are at the core of network programming using sockets, pipes, etc. and are also at the core of any file system operations. Hence, they are used by every running process and are at the core of most of the interesting stuff you can do with a computer. You'll see many more examples of how to use them in the following chapters or in the attached Spyglass project.

System Calls Many methods on Ruby's IO class map to system calls of the same name. These include open(2), close(2), read(2), write(2), pipe(2), fsync(2), stat(2), among others.

28

Chapter 6

Processes Have Resource Limits In the last chapter we looked at the fact that open resources are represented by file descriptors. You may have noticed that when resources aren't being closed the file descriptor numbers continue to increase. It begs the question: how many file descriptors can one process have? The answer depends on your system configuration, but the important point is there are some resource limits imposed on a process by the kernel.

Finding the Limits We'll continue on the subject of file descriptors. Using Ruby we can ask directly for the maximum number of allowed file descriptors: p Process.getrlimit(:NOFILE)

On my machine this snippet outputs: [2560, 9223372036854775807]

29

We used a method called Process.getrlimit and asked for the maximum number of open files using the symbol :NOFILE . It returned a two-element Array. The first element in the Array is the soft limit for the number of file descriptors, the second element in the Array is the hard limit for the number of file descriptors.

Soft Limits vs. Hard Limits What's the difference? Glad you asked. The soft limit isn't really a limit. Meaning that if you exceed the soft limit (in this case by opening more than 2560 resources at once) an exception will be raised, but you can always change that limit if you want to.

Note that the hard limit on my system for the number of file descriptors is a ridiculously large integer. Is it even possible to open that many? Likely not, I'm sure you'd run into hardware constraints before that many resources could be opened at once. On my system that number actually represents infinity. It's repeated in the constant Process::RLIMIT_INFINITY . Try comparing those two values to be sure. So, on my system, I can effectively open as many resources as I'd like, once I bump the soft limit for my needs.

So any process is able to change its own soft limit, but what about the hard limit? Typically that can only be done by a superuser. However, your process is also able to bump the hard limit assuming it has the required permissions. If you're interested in changing the limits at a sytem-wide level then start by having a look at sysctl(8). 30

Bumping the Soft Limit Let's go ahead and bump the soft limit for the current process: Process.setrlimit(:NOFILE, 4096) p Process.getrlimit(:NOFILE)

outputs: [4096, 4096]

You can see that we set a new limit for the number of open files, and upon asking for that limit again both the hard limit and the soft limit were set to the new value 4096. We can optionally pass a third argument to Process.setrlimit specifying a new hard limit as well, assuming we have the permissions to do so. Note that lowering the hard limit, as we did in that last snippet, is irreversible: once it comes down it won't go back up. The following example is a common way to raise the soft limit of a system resource to be equal with the hard limit, the maximum allowed value. Process.setrlimit(:NOFILE, Process.getrlimit(:NOFILE)[1])

31

Exceeding the Limit Note that exceeding the soft limit will raise

Errno::EMFILE :

# Set the maximum number of open files to 3. We know this # will be maxed out because the standard streams occupy # the first three file descriptors. Process.setrlimit(:NOFILE, 3) File.open('/dev/null')

outputs: Errno::EMFILE: Too many open files - /dev/null

Other Resources You can use these same methods to check and modify limits on other system resources. Some common ones are:

32

# The maximum number of simultaneous processes # allowed for the current user. Process.getrlimit(:NPROC) # The largest size file that may be created. Process.getrlimit(:FSIZE) # The maximum size of the stack segment of the # process. Process.getrlimit(:STACK)

Have a look at the documentation 1 for available options.

Process.getrlimit

for a full listing of the

In the Real World Needing to modify limits for system resources isn't a common need for most programs. However, for some specialized tools this can be very important. One use case is any process needing to handle thousands of simultaneous network connections. An example of this is the httperf(1) http performance tool. A command like httperf --hog --server www --num-conn 5000 will ask httperf(1) to create 5000 concurrent connections. Obviously this will be a problem on my system due to its default soft limit, so httperf(1) will need to bump its soft limit before it can properly do its testing.

1.http://www.ruby-doc.org/core-1.9.3/Process.html#method-c-setrlimit

33

Another real world use case for limiting system resources is a situation where you execute third-party code and need to keep it within certain constraints. You could set limits for the processes running that code and revoke the permissions required to change them, hence ensuring that they don't use more resources than you allow for them.

System Calls Ruby's Process.getrlimit and respectively.

Process.setrlimit

map to getrlimit(2) and setrlimit(2),

34

Chapter 7

Processes Have an Environment Environment, in this sense, refers to what's known as 'environment variables'. Environment variables are key-value pairs that hold data for a process. Every process inherits environment variables from its parent. They are set by a parent process and inherited by its child processes. Environment variables are per-process and are global to each process. Here's a simple example of setting an environment variable in a Ruby process, and reading that environment variable.

bash

shell, launching a

$ MESSAGE='wing it' ruby -e "puts ENV['MESSAGE']"

The VAR=value syntax is the bash way of setting environment variables. The same thing can be accomplished in Ruby using the ENV constant. # The same thing, with places reversed! ENV['MESSAGE'] = 'wing it' system "echo $MESSAGE"

Both of these examples print: 35

wing it

In bash environment variables are accessed using the syntax: $VAR . As you can tell from these few examples environment variables can be used to share state between processes running different languages, bash and ruby in this case.

It's a hash, right? Although ENV uses the hash-style accessor API it's not actually a Hash . For instance, it implements Enumerable and some of the Hash API, but not all of it. Key methods like merge are not implemented. So you can do things like ENV.has_key? , but don't count on all hash operations working. puts ENV['EDITOR'] puts ENV.has_key?('PATH') puts ENV.is_a?(Hash)

outputs: vim true false

36

In the Real World In the real world environment variables have many uses. Here's a few that are common workflows in the Ruby community: $ RAILS_ENV=production rails server $ EDITOR=mate bundle open actionpack $ QUEUE=default rake resque:work

Environment variables are often used as a generic way to accept input into a command-line program. Any terminal (on Unix or Windows) already supports them and most programmers are familiar with them. Using environment variables is often less overhead than explicitly parsing command line options.

System Calls There are no system calls for directly manipulating environment variables, but the C library functions setenv(3) and getenv(3) do the brunt of the work. Also have a look at environ(7) for an overview.

37

Chapter 8

Processes Have Arguments Every process has access to a special array called ARGV . Other programming languages may implement it slightly differently, but every one has something called 'argv'. argv is a short form for 'argument vector'. In other words: a vector, or array, of arguments. It holds the arguments that were passed in to the current process on the command line. Here's an example of inspecting ARGV and passing in some simple options. $ cat argv.rb p ARGV $ ruby argv.rb foo bar -va ["foo", "bar", "-va"]

It's an Array! Unlike the previous chapter, where we learned that ENV isn't a Hash , ARGV is simply an Array . You can add elements to it, remove elements from it, change the elements it contains, whatever you like. But if it simply represents the arguments passed in on the command line why would you need to change anything? Some libraries will read from ARGV to parse command line options, for example. You can programmatically change ARGV before they have a chance to see it in order to modify the options at runtime. 38

In the Real World The most common use case for ARGV is probably for accepting filenames into a program. It's very common to write a program that takes one or more filenames as input on the command line and does something useful with them. The other common use case, as mentioned, is for parsing command line input. There are many Ruby libraries for dealing with command line input. One called optparse is available as part of the standard library. But now that you know how ARGV works you can skip that extra overhead for simple command line options and do it by hand. If you just want to support a few flags you can implement them directly as array operations. # did the user request help? ARGV.include?('--help') # get the value of the -c option ARGV.include?('-c') && ARGV[ARGV.index('-c') + 1]

39

Chapter 9

Processes Have Names Unix processes have very few inherent ways of communicating about their state. Programmers have worked around this and invented things like logfiles. Logfiles allow processes to communicate anything they want about their state by writing to the filesystem, but this operates at the level of the filesystem rather than being inherent to the process itself. Similarly, processes can use the network to open sockets and communicate with other processes. But again, that operates at a different level than the process itself, since it relies on the network. There are two mechanisms that operate at the level of the process itself that can be used to communicate information. One is the process name, the other is exit codes.

Naming Processes Every process on the system has a name. For example, when you start up an irb session that process is given the name 'irb'. The neat thing about process names is that they can be changed at runtime and used as a method of communication. In Ruby you can access the name of the current process in the $PROGRAM_NAME variable. Similarly, you can assign a value to that global variable to change the name of the current process. 40

puts $PROGRAM_NAME 10.downto(1) do |num| $PROGRAM_NAME = "Process: #{num}" puts $PROGRAM_NAME end

outputs: irb Process: Process: Process: Process: Process: Process: Process: Process: Process: Process:

10 9 8 7 6 5 4 3 2 1

As a fun exercise you can start an irb session, print the pid, and change the process name. Then you can use the ps(1) utility to see your changes reflected on the system. Unfortunately this global variable (and its mirror $0 ) is the only mechanism provided by Ruby for this feature. There is not a more intent-revealing way to change the name of the current process.

41

In the Real World To see an example of how this is used in a real project read through How Resque Manages Processes in the appendices.

42

Chapter 10

Processes Have Exit Codes When a process comes to an end it has one last chance to make its mark on the world: its exit code. Every process that exits does so with a numeric exit code (0-255) denoting whether it exited successfully or with an error. Traditionally, a process that exits with an exit code of 0 is said to be successful. Any other exit code denotes an error, with different codes pointing to different errors. Though traditionally they're used to denote different errors, they're really just a channel for communication. All you need to do is handle the different exit codes that a process may exit with in a way that suits your program and you've gotten away from the traditions. It's usually a good idea to stick with the '0 as success' exit code tradition so that your programs will play nicely with other Unix tools.

How to Exit a Process There are several ways you can exit a process in Ruby, each for different purposes.

exit The simplest way to exit a process is using Kernel#exit . This is also what happens implicitly when your script ends without an explicit exit statement. 43

# This will exit the program with the success status code (0). exit

# You can pass a custom exit code to this method exit 22

# When Kernel#exit is invoked, before exiting Ruby invokes any blocks # defined by Kernel#at_exit. at_exit { puts 'Last!' } exit

will output: Last!

exit! Kernel#exit!

is almost exactly the same as Kernel#exit , but with two key differences. The first is that it sets an unsuccessful status code by default (1), and the second is that it will not invoke any blocks defined using Kernel#at_exit . # This will exit the program with a status code 1. exit!

44

# You can still pass an exit code. exit! 33

# This block will never be invoked. at_exit { puts 'Silence!' } exit!

abort Kernel#abort provides a generic way to exit a process unsuccessfully. set the exit code to 1 for the current process.

Kernel#abort

will

# Will exit with exit code 1. abort

# You can pass a message to Kernel#abort. This message will be printed # to STDERR before the process exits. abort "Something went horribly wrong."

# Kernel#at_exit blocks are invoked when using Kernel#abort. at_exit { puts 'Last!' } abort "Something went horribly wrong."

will output:

45

Something went horribly wrong. Last!

raise A different way to end a process is with an unhandled exception. This is something that you never want to happen in a production environment, but it's almost always happening in development and test environments. Note that Kernel#raise , unlike the previous methods, will not exit the process immediately. It simply raises an exception that may be rescued somewhere up the stack. If the exception is not rescued anywhere in the codebase then the unhandled exception will cause the process to exit. Ending a process this way will still invoke any at_exit handlers and will print the exception message and backtrace to STDERR . # Similar to abort, an unhandled exception will set the exit code to 1. raise 'hell'

46

Chapter 11

Processes Can Fork Use the fork(2), Luke Forking is one of the most powerful concepts in Unix programming. The fork(2) system call allows a running process to create new process programmatically. This new process is an exact copy of the original process. Up until now we've talked about creating processes by launching them from the terminal. We've also mentioned low level operating system processes that create other processes: fork(2) is how they do it. When forking, the process that initiates the fork(2) is called the "parent", and the newly created process is called the "child". The child process inherits a copy of all of the memory in use by the parent process, as well as any open file descriptors belonging to the parent process. Let's take a moment to review child processes from the eye of our first three chapters. Since the child process is an entirely new process, it gets its own unique pid. The parent of the child process is, obviously, its parent process. So its ppid is set to the pid of the process that initiated the fork(2).

47

The child process inherits any open file descriptors from the parent at the time of the fork(2). It's given the same map of file descriptor numbers that the parent process has. In this way the two processes can share open files, sockets, etc. The child process inherits a copy of everything that the parent process has in main memory. In this way a process could load up a large codebase, say a Rails app, that occupies 500MB of main memory. Then this process can fork 2 new child processes. Each of these child processes would effectively have their own copy of that codebase loaded in memory. The call to fork returns near-instantly so we now have 3 processes with each using 500MB of memory. Perfect for when you want to have multiple instances of your application loaded in memory at the same time. Because only one process needs to load the app and forking is fast, this method is faster than loading the app 3 times in separate instances. The child processes would be free to modify their copy of the memory without affecting what the parent process has in memory. See the next chapter for a discussion of copy-on-write and how it affects memory when forking. Let's get started with forking in Ruby by looking at a mind-bending example: if fork puts "entered the if block" else puts "entered the else block" end

outputs: 48

entered the if block entered the else block

WTF! What's going on here? A call to the fork method has taken the once-familiar if construct and turned it on its head. Somehow this piece of code is entering both the if and else block of the if construct! It's no mystery what's happening here. One call to the fork method actually returns twice. Remember that fork creates a new process. So it returns once in the calling process (parent) and once in the newly created process (child). The last example becomes more obvious if we print the pids. puts "parent process pid is #{Process.pid}" if fork puts "entered the if block from #{Process.pid}" else puts "entered the else block from #{Process.pid}" end

outputs: parent process is 21268 entered the if block from 21268 entered the else block from 21282

49

Now it becomes clear that the code in the if block is being executed by the parent process, while the code in the else block is being executed by the child process. The child process will exit after executing its code in the else block, while the parent process will carry on. Again, there's a rhythm to this beat, and it has to do with the return value of the fork method. In the child process fork returns nil . Since nil is falsy it executes the code in the else block. In the parent process fork returns the pid of the newly created child process. Since an integer is truthy it executes the code in the if block. This concept is illustrated nicely by simply printing the return value of a

fork

call.

puts fork

outputs 21423 nil

Here we have the two different return values. The first value returned is the pid of the newly created child process; this comes from the parent. The second return value is the nil from the child process.

50

Multicore Programming? In a roundabout way, yes. By making new processes it means that your code is able, but not guaranteed, to be distributed across multiple CPU cores. Given a system with 4 CPUs, if you fork 4 new processes then those can be handled each by a separate CPU, giving you multicore concurrency. However, there's no guarantee that stuff will be happening in parallel. On a busy system it's possible that all 4 of your processes are handled by the same CPU.

fork(2) creates a new process that's a copy of the old process. So if a process is using 500MB of main memory, then it forks, now you have 1GB in main memory. Do this another ten times and you can quickly exhaust main memory. This is often called a fork bomb. Before you turn up the concurrency make sure that you know the consequences.

Using a Block In the example above we've demonstrated fork with an if/else construct. It's also possible, and more common in Ruby code, to use fork with a block. When you pass a block to the fork method that block will be executed in the new child process, while the parent process simply skips over it. The child process exits 51

when it's done executing the block. It does not continue along the same code path as the parent. fork do # Code here is only executed in the child process end

# Code here is only executed in the parent process.

In the Real World Have a look at either of the appendices, or the attached Spyglass project, to see some real-world examples of using fork(2).

System Calls Ruby's

Kernel#fork

maps to fork(2).

52

Chapter 12

Orphaned Processes Out of Control You may have noticed when running the examples in the last chapter that when child processes are involved, it's no longer possible to control everything from a terminal like we're used to. When starting a process via a terminal, we normally have only one process writing to STDOUT , taking keyboard input, or listening for that Ctrl-C telling it to exit. But once that process has forked child processes that all becomes a little more difficult. When you press Ctrl-C which process should exit? All of them? Only the parent? It's good to know about this stuff because it's actually very easy to create orphaned processes: fork do 5.times do sleep 1 puts "I'm an orphan!" end end abort "Parent process died..."

53

If you run this program from a terminal you'll notice that since the parent process dies immediately the terminal returns you to the command prompt. At which point, it's overwritten by the STDOUT from the child process! Strange things can start to happen when forking processes.

Abandoned Children What happens to a child process when its parent dies? The short answer is, nothing. That is to say, the operating system doesn't treat child processes any differently than any other processes. So, when the parent process dies the child process continues on; the parent process does not take the child down with it.

Managing Orphans Can you still manage orphaned processes? We're getting a bit ahead of ourselves with this question, but it touches on two interesting concepts. The first is something called daemon processes. Daemon processes are long running processes that are intentionally orphaned and meant to stay running forever. These are covered in detail in a later chapter.

54

The second interesting bit here is communicating with processes that are not attached to a terminal session. You can do this using something called Unix signals. This is also covered in more detail in a later chapter. We'll soon talk about how to properly manage and control child processes.

55

Chapter 13

Processes Are Friendly Let's take a step back from looking at code for a minute to talk about a higher level concept and how it's handled in different Ruby implementations.

Being CoW Friendly As mentioned in the forking chapter, fork(2) creates a new child process that's an exact copy of the parent process. This includes a copy of everything the parent process has in memory. Physically copying all of that data can be considerable overhead, so modern Unix systems employ something called copy-on-write semantics (CoW) to combat this. As you may have guessed from the name, CoW delays the actual copying of memory until it needs to be written. So a parent process and a child process will actually share the same physical data in memory until one of them needs to modify it, at which point the memory will be copied so that proper separation between the two processes can be preserved.

56

arr = [1,2,3] fork do # At this point the child process has been initialized. # Using CoW this process doesn't need to copy the arr variable, # since it hasn't modified any shared values it can continue reading # from the same memory location as the parent process. p arr end

arr = [1,2,3] fork do # At this point the child process has been initialized. # Because of CoW the arr variable hasn't been copied yet. arr [#, #]

IO.pipe returns an array with two elements, both of which are IO objects. Ruby's amazing IO class 1 is the superclass to File , TCPSocket , UDPSocket , and others. As such, all of these resources have a common interface. 89

The IO objects returned from IO.pipe can be thought of something like anonymous files. You can basically treat them the same way you would a File . You can call #read , #write , #close , etc. But this object won't respond to #path and won't have a location on the filesystem. Still holding back from bringing in multiple processes let's demonstrate communication with a pipe: reader, writer = IO.pipe writer.write("Into the pipe I go...") writer.close puts reader.read

outputs Into the pipe I go...

Pretty simple right? Notice that I had to close the writer after I wrote to the pipe? That's because when the reader calls IO#read it will continue trying to read data until it sees an EOF (aka. end-of-file marker 2). This tells the reader that no more data will be available for reading. So long as the writer is still open the reader might see more data, so it waits. By closing the writer before reading it puts an EOF on the pipe so the reader stops reading after it gets the initial data. If you skip closing the writer then the reader will block and continue trying to read indefinitely. 1.http://librelist.com/browser//usp.ruby/2011/9/17/the-ruby-io-class/ 2.http://en.wikipedia.org/wiki/End-of-file

90

Pipes Are One-Way Only reader, writer = IO.pipe reader.write("Trying to get the reader to write something")

outputs >> reader.write("Trying to get the reader to write something") IOError: not opened for writing from (irb):2:in `write' from (irb):2

The IO objects returned by IO.pipe can only be used for uni-directional communication. So the reader can only read and the writer can only write. Now let's introduce processes into the mix.

Sharing Pipes In the chapter on forking I described how open resources are shared, or copied, when a process forks a child. Pipes are considered a resource, they get their own file descriptors and everything, so they are shared with child processes. Here's a simple example of using a pipe to communicate between a parent and child process. The child indicates to the parent that it has finished an iteration of work by writing to the pipe: 91

reader, writer = IO.pipe fork do reader.close 10.times do # heavy lifting writer.puts "Another one bites the dust" end end writer.close while message = reader.gets $stdout.puts message end

outupts

Another one bites the dust

ten times.

Notice that, like above, the unused ends of the pipe are closed so as not to interfere with EOF being sent. There's actually one more layer when considering EOF now that two processes are involved. Since the file descriptors were copied there's now 4 instances floating around. Since only two of them will be used to communicate the other 2 instances must be closed. Hence the extra instances of closing. Since the ends of the pipe are IO objects we can call any IO methods on them, not just #read and #write . In this example I use #puts and #gets to read and write a String delimited with a newline. I actually used those here to simplify one aspect of pipes: pipes hold a stream of data.

92

Streams vs. Messages When I say stream I mean that when writing and reading data to a pipe there's no concept of beginning and end. When working with an IO stream, like pipes or TCP sockets, you write your data to the stream followed by some protocol-specific delimiter. For example, HTTP uses a series of newlines to delimit the headers from the body. Then when reading data from that IO stream you read it in one chunk at a time, stopping when you come across the delimiter. That's why I used #puts and #gets in the last example: it used a newline as the delimiter for me. As you may have guessed it's possible to communicate via messages instead of streams. We can't do it with pipe, but we can do it with Unix sockets. Without going into too much detail, Unix sockets are a type of socket that can only communicate on the same physical machine. As such it's much faster than TCP sockets and is a great fit for IPC. Here's an example where we create a pair of Unix sockets that can communicate via messages: require 'socket' Socket.pair(:UNIX, :DGRAM, 0) #=> [#, #]

This creates a pair of UNIX sockets these sockets that are already connected up to each other. These sockets communicate using datagrams, rather than a stream. In this way you write a whole message to one of the sockets and read a whole message from the other socket. No delimiters required.

93

Here's a slightly more complex version of the pipe example where the child process actually waits for the parent to tell it what to work on, then it reports back to the parent once it's finished the work: require 'socket' child_socket, parent_socket = Socket.pair(:UNIX, :DGRAM, 0) maxlen = 1000 fork do parent_socket.close 4.times do instruction = child_socket.recv(maxlen) child_socket.send("#{instruction} accomplished!", 0) end end child_socket.close 2.times do parent_socket.send("Heavy lifting", 0) end 2.times do parent_socket.send("Feather lifting", 0) end 4.times do $stdout.puts parent_socket.recv(maxlen) end

outputs:

94

Heavy lifting accomplished! Heavy lifting accomplished! Feather lifting accomplished! Feather lifting accomplished!

So whereas pipes provide uni-directional communication, a socket pair provides bidirectional communication. The parent socket can both read and write to the child socket, and vice versa.

Remote IPC? IPC implies communication between processes running on the same machine. If you're interested in scaling up from one machine to many machines while still doing something resembling IPC there are a few things to look into. The first one would simply be to communicate via TCP sockets. This option would require more boilerplate code than the others for a non-trivial system. Other plausible solutions would be RPC 3 (remote procedure call), a messaging system like ZeroMQ 4, or the general body of distributed systems 5.

In the Real World Both pipes and socket pairs are useful abstractions for communicating between processes. They're fast and easy. They're often used as a communication channel instead of a more brute force approach such as a shared database or log file. 3.http://en.wikipedia.org/wiki/Remote_procedure_call 4.http://www.zeromq.org/ 5.http://en.wikipedia.org/wiki/Distributed_computing

95

As for which method to use: it depends on your needs. Keep in mind that pipes are uni-directional and socket pairs are bi-directional when weighing your decision. For a more in-depth example have a look at the Spyglass Master class in the included Spyglass project. It uses a more involved example of the code you saw above where many child processes communicate over a single pipe with their parent process.

System Calls Ruby's IO.pipe maps to pipe(2), Socket.pair maps to socketpair(2). to recv(2) and Socket.send maps to send(2).

Socket.recv

maps

96

Chapter 18

Daemon Processes Daemon processes are processes that run in the background, rather than under the control of a user at a terminal. Common examples of daemon processes are things like web servers, or database servers which will always be running in the background in order to serve requests. Daemon processes are also at the core of your operating system. There are many processes that are constantly running in the background that keep your system functioning normally. These are things like the window server on a GUI system, printing services or audio services so that your speakers are always ready to play that annoying 'ding' notification.

The First Process There is one daemon process in particular that has special significance for your operating system. We talked in a previous chapter about every process having a parent process. Can that be true for all processes? What about the very first process on the system? This is a classic who-created-the-creator kind of problem, and it has a simple answer. When the kernel is bootstrapped it spawns a process called the init process. This process has a ppid of 0 and is the 'grandparent of all processes'. It's the first one and it has no ancestor. Its pid is 1 .

97

Creating Your First Daemon Process What do we need to get started? Not much. Any process can be made into a daemon process. Let's look to the rack project 1 for an example here. Rack ships with a rackup command to serve applications using different rack supported web servers. Web servers are a great example of a process that will never end; so long as your application is active you'll need a server listening for connections. The rackup command includes an option to daemonize the server and run it in the background. Let's have a look at what that does.

1.http://github.com/rack/rack

98

Diving into Rack def daemonize_app if RUBY_VERSION < "1.9" exit if fork Process.setsid exit if fork Dir.chdir "/" STDIN.reopen "/dev/null" STDOUT.reopen "/dev/null", "a" STDERR.reopen "/dev/null", "a" else Process.daemon end end

Lots going on here. Let's first jump to the else block. Ruby 1.9.x ships with a method called Process.daemon that will daemonize the current process! How convenient! But don't you want to know how it works under the hood? I knew ya did! The truth is that if you look at the MRI source for Process.daemon 2 and stumble through the C code it ends up doing the exact same thing that Rack does in the if block above. So let's continue using that as an example. We'll break down the code line by line.

2.http://github.com/ruby/ruby/blob/c852d76f46a68e28200f0c3f68c8c67879e79c86/process.c#L4817-4860

99

Daemonizing a Process, Step by Step exit if fork

This line of code makes intelligent use of the return value of the fork method. Recall from the forking chapter that fork returns twice, once in the parent process and once in the child process. In the parent process it returns the child's pid and in the child process it returns nil. As always, the return value will be truth-y for the parent and false-y for the child. This means that the parent process will exit, and as we know, orphaned child processes carry on as normal.

If a process is orphaned then what happens when you ask for

Process.ppid ?

This is where knowledge of the init process becomes relevant. The ppid of orphaned processes is always 1 . This is the only process that the kernel can be sure is active at all times.

This first step is imperative when creating a daemon because it causes the terminal that invoked this script to think the command is done, returning control to the terminal and taking it out of the equation. Process.setsid

100

Calling

Process.setsid

does three things:

1. The process becomes a session leader of a new session 2. The process becomes the process group leader of a new process group 3. The process has no controlling terminal To understand exactly what effect these three things have we need to step out of the context of our Rack example for a moment and look a little deeper.

Process Groups and Session Groups Process groups and session groups are all about job control. By 'job control' I'm referring to the way that processes are handled by the terminal. We begin with process groups. Each and every process belongs to a group, and each group has a unique integer id. A process group is just a collection of related processes, typically a parent process and its children. However you can also group your processes arbitrarily by setting their group id using Process.setpgrp(new_group_id) . Have a look at the output from the following snippet. puts Process.getpgrp puts Process.pid

101

If you ran that code in an irb session then those two values will be equal. Typically the process group id will be the same as the pid of the process group leader. The process group leader is the 'originating' process of a terminal command. ie. If you start an irb process at the terminal it will become the group leader of a new process group. Any child processes that it creates will be made part of the same process group. Try out the following example to see that process groups are inherited. puts Process.pid puts Process.getpgrp fork { puts Process.pid puts Process.getpgrp }

You can see that although the child process gets a unique pid it inherits the group id from its parent. So these two processes are part of the same group. You'll recall that we looked previously at Orphaned Processes. In that section I said that child processes are not given special treatment by the kernel. Exit a parent process and the child will continue on. This is the behaviour when a parent process exits, but the behaviour is a bit different when the parent process is being controlled by a terminal and is killed by a signal. Consider for a moment: a Ruby script that shells out to a long-running shell command, eg. a long backup script. What happens if you kill the Ruby script with a Ctrl-C?

102

If you try this out you'll notice that the long-running backup script is not orphaned, it does not continue on when its parent is killed. We haven't set up any code to forward the signal from the parent to the child, so how is this done? The terminal receives the signal and forwards it on to any process in the foreground process group. In this case, both the Ruby script and the long-running shell command would part of the same process group, so they would both be killed by the same signal. And then session groups... A session group is one level of abstraction higher up, a collection of process groups. Consider the following shell command: git log | grep shipped | less

In this case each command will get its own process group, since each may be creating child processes but none is a child process of another. Even though these commands are not part of the same process group one Ctrl-C will kill them all. These commands are part of the same session group. Each invocation from the shell gets its own session group. An invocation may be a single command or a string of commands joined by pipes. Like in the above example, a session group may be attached to a terminal. It might also not be attached to any terminal, as in the case of a daemon. Again, your terminal handles session groups in a special way: sending a signal to the session leader will forward that signal to all the process groups in that session, which will forward it to all the processes in those process groups. Turtles all the way down ;) 103

There is a system call for retrieving the current session group id, getsid(2), but Ruby's core library has no interface to it. Using Process.setsid will return the id of the new sesssion group it creates, you can store that if you need it. So, getting back to our Rack example, in the first line a child process was forked and the parent exited. The originating terminal recognized the exit and returned control to the user, but the forked process still has the inherited group id and session id from its parent. At the moment this forked process is neither a session leader nor a group leader. So the terminal still has a link to our forked process, if it were to send a signal to its session group the forked process would receive it, but we want to be fully detached from a terminal. Process.setsid

will make this forked process the leader of a new process group and a new session group. Note that Process.setsid will fail in a process that is already a process group leader, it can only be run from child processes. This new session group does not have a controlling terminal, but technically one could be assigned. exit if fork

The forked process that had just become a process group and session group leader forks again and then exits. This newly forked process is no longer a process group leader nor a session leader. Since the previous session leader had no controlling terminal, and this process is not a

104

session leader, it's guaranteed that this process can never have a controlling terminal. Terminals can only be assigned to session leaders. This dance ensures that our process is now fully detached from a controlling terminal and will run to its completion. Dir.chdir "/"

This changes the current working directory to the root directory for the system. This isn't strictly necessary but it's an extra step to ensure that current working directory of the daemon doesn't disappear during its execution. This avoids problems where the directory that the daemon was started from gets deleted or unmounted for any reason. STDIN.reopen "/dev/null" STDOUT.reopen "/dev/null", "a" STDERR.reopen "/dev/null", "a"

This sets all of the standard streams to go to /dev/null , a.k.a. to be ignored. Since the daemon is no longer attached to a terminal session these are of no use anyway. They can't simply be closed because some programs expect them to always be available. Redirecting them to /dev/null ensures that they're still available to the program but have no effect.

105

In the Real World As mentioned, the rackup command ships with a command line option for daemonizing the process. Same goes with any of the popular Ruby web servers. If you want to dig in to more internals of daemon processes you should look at the daemons rubygem 3. If you think you want to create a daemon process you should ask yourself one basic question: Does this process need to stay responsive forever? If the answer is no then you probably want to look at a cron job or background job system. If the answer is yes, then you probably have a good candidate for a daemon process.

System Calls Ruby's Process.setsid maps to setsid(2), Process.getpgrp maps to getpgrp(2). Other system calls mentioned in this chapter were covered in detail in previous chapters.

3.http://rubygems.org/gems/daemons

106

Chapter 19

Spawning Terminal Processes A common interaction in a Ruby program is 'shelling out' from your program to run a command in a terminal. This happens especially when I'm writing a Ruby script to glue together some common commands for myself. There are several ways you can spawn processes to run terminal commands in Ruby. Before we look at the different ways of 'shelling out' let's look at the mechanism they're all using under the hood.

fork + exec All of the methods described below are variations on one theme: fork(2) + exec(2). We've had a good look at fork(2) in previous chapters, but this is our first look at exec(2). It's pretty simple, exec(2) allows you to replace the current process with a different process. Put another way: exec(2) allows you to transform the current process into any other process. You can take a Ruby process and turn it into a Python process, or an ls(1) process, or another Ruby process.

107

exec(2) transforms the process and never returns. Once you've transformed your Ruby process into something else you can never come back. exec 'ls', '--help'

The fork + exec combo is a common one when spawning new processes. exec(2) is a very powerful and efficient way to transform the current process into another one; the only catch is that your current process is gone. That's where fork(2) comes in handy. You can use fork(2) to create a new process, then use exec(2) to transform that process into anything you like. Voila! Your current process is still running just as it was before and you were able to spawn any other process that you want to. If your program depends on the output from the exec(2) call you can use the tools you learned in previous chapters to handle that. Process.wait will ensure that your program waits for the child process to finish whatever it's doing so you can get the result back. Keep in mind that exec(2) doesn't close any open file descriptors (by default) or do any memory cleanup. You can use this to your advantage in certain situations. In other situations it may cause problems with resource usage. hosts = File.open('/etc/hosts') exec 'python', '-c', "import os; print os.fdopen(#{hosts.fileno}).read()"

In this example we start up a Ruby program and open the /etc/hosts file. Then we exec(2) a python process and tell it to open the file descriptor number that Ruby received for opening the /etc/hosts file. You can see that python recognizes this file 108

descriptor (because it was shared via exec(2)) and is able to read from it without having to open the file again.

Arguments to exec Notice in all of the examples above I sent an array of arguments to exec , rather than passing them as a string? There's a subtle difference to the two argument forms. Pass a string to exec and it will actually start up a shell process and pass the string to the shell to interpret. Pass an array and it will skip the shell and set up the array directly as the ARGV to the new process. Generally you want to avoid passing a string unless you really need to. Pass an array where possible. Passing a string and running code through the shell can raise security concerns. If user input is involved it may be possible for them to inject a malicious command directly in a shell, potentially gaining access to any privileges the current process has. In a case where you want to do something like exec('ls * | awk '{print($1)}') you'll have to pass it as a string.

Kernel#system system('ls') system('ls', '--help') system('git log | tail -10')

109

The return value of Kernel#system reflects the exit code of the terminal command in the most basic way. If the exit code of the terminal command was 0 then it returns true , otherwise it returns false . The standard streams of the the terminal command are shared with the current process (through the magic of fork(2)), so any output coming from the terminal command should be seen in the same way output is seen from the current process.

Kernel#` `ls` `ls --help` %x[git log | tail -10]

Kernel#`

works slightly differently. The value returned is the program collected into a String.

STDOUT

of the terminal

As mentioned, it's using fork(2) under the hood and it doesn't do anything special with STDERR , so you can see in the second example that STDERR is printed to the screen just as with Kernel#system . Kernel#`

and

%x[]

do the exact same thing.

110

Process.spawn # Ruby 1.9 only! # This call will start up the 'rails server' process with the # RAILS_ENV environment variable set to 'test'. Process.spawn({'RAILS_ENV' => 'test'}, 'rails server') # This call will merge STDERR with STDOUT for the duration # of the 'ls --help' program. Process.spawn('ls', '--help', STDERR => STDOUT)

Process.spawn

is a bit different than the others in that it is non-blocking.

If you compare the following two examples you will see that Kernel#system will block until the command is finished, whereas Process.spawn will return immediately. # Do it the blocking way system 'sleep 5' # Do it the non-blocking way Process.spawn 'sleep 5' # Do it the blocking way with Process.spawn # Notice that it returns the pid of the child process pid = Process.spawn 'sleep 5' Process.waitpid(pid)

111

The last example in this code block is a really great example of the flexibility of Unix programming. In previous chapters we talked a lot about Process.wait , but it was always in the context of forking and then running some Ruby code. You can see from this example that the kernel cares not what you are doing in your process, it will always work the same. So even though we fork(2) and then run the sleep(1) program (a C program) the kernel still knows how to wait for that process to finish. Not only that, it will be able to properly return the exit code just as was happening in our Ruby programs. All code looks the same to the kernel; that's what makes it such a flexible system. You can use any programming language to interact with any other programming language, and all will be treated equally.

Process.spawn

takes many options that allow you to control the behaviour of the child process. I showed a few useful ones in the example above. Consult the official rdoc 1 for an exhaustive list.

IO.popen # This example will return a file descriptor (IO object). Reading from it # will return what was printed to STDOUT from the shell command. IO.popen('ls')

1.http://www.ruby-doc.org/core-1.9.3/Process.html#method-c-spawn

112

The most common usage for IO.popen is an implementation of Unix pipes in pure Ruby. That's where the 'p' comes from in popen. Underneath it's still doing the fork+exec, but it's also setting up a pipe to communicate with the spawned process. That pipe is passed as the block argument in the block form of IO.popen . # An IO object is passed into the block. In this case we open the stream # for writing, so the stream is set to the STDIN of the spawned process. # # If we open the stream for reading (the default) then # the stream is set to the STDOUT of the spawned process. IO.popen('less', 'w') { |stream| stream.puts "some\ndata" }

With IO.popen you have to choose which stream you have access to. You can't access them all at once.

open3 Open3 allows simultaneous access to the STDIN, STDOUT, and STDERR of a spawned process.

113

# This is available as part of the standard library. require 'open3' Open3.popen3('grep', 'data') { |stdin, stdout, stderr| stdin.puts "some\ndata" stdin.close puts stdout.read }

# Open3 will use Process.spawn when available. Options can be passed to # Process.spawn like so: Open3.popen3('ls', '-uhh', :err => :out) { |stdin, stdout, stderr| puts stdout.read }

Open3

acts like a more flexible version of

IO.popen ,

for those times when you need it.

In the Real World All of these methods are common in the Real World. Since they all differ in their behaviour you have to select one based on your needs. One drawback to all of these methods is that they rely on fork(2). What's wrong with that? Imagine this scenario: You have a big Ruby app that is using hundreds of MB of memory. You need to shell out. If you use any of the methods above you'll incur the cost of forking. Even if you're shelling out to a simple ls(1) call the kernel will still need to make sure that all of the memory that your Ruby process is using is available for that new ls(1) 114

process. Why? Because that's the API of fork(2). When you fork(2) the process the kernel doesn't know that you're about to transform that process with an exec(2). You may be forking in order to run Ruby code, in which case you'll need to have all of the memory available. It's good to keep in mind that fork(2) has a cost, and sometimes it can be a performance bottleneck. What if you need to shell out a lot and don't want to incur the cost of fork(2)? There are some native Unix system calls for spawning processes without the overhead of fork(2). Unfortunately they don't have support in the Ruby language core library. However, there is a Rubygem that provides a Ruby interface to these system calls. The posix-spawn project 2 provides access to posix_spawn(2), which is available on most Unix systems. posix-spawn mimics the Process.spawn API. In fact, most of the options that you pass to Process.spawn can also be passed to POSIX::Spawn.spawn . So you can keep using the same API and yet reap the benefits of faster, more resource efficient spawning.

At a basic level posix_spawn(2) is a subset of fork(2). Recall the two discerning attributes of a new child process from fork(2): 1) it gets an exact copy of everything that the parent process had in memory, and 2) it gets a copy of all the file descriptors that the parent process had open. posix_spawn(2) preserves #2, but not #1. That's the big difference between the two. So you can expect a newly spawned process to have access to any of the file descriptors opened by the parent, but it won't share any of the memory. This is what makes posix_spawn(2) faster and more efficient than fork(2). But keep in mind that it also makes it less flexible. 2.http://github.com/rtomayko/posix-spawn

115

System Calls Ruby's Kernel#system maps to system(3), Kernel#exec maps to execve(2), maps to popen(3), posix-spawn uses posix_spawn(2).

IO.popen

116

Chapter 20

Ending Working with processes in Unix is about two things: abstraction and communication.

Abstraction The kernel has an extremely abstract (and simple) view of its processes. As programmers we're used to looking at source code as the differentiator between two programs. We are masters of many programming languages, using each for different purposes. We couldn't possibly write memory-efficient code in a language with a garbage collector, we'll have to use C. But we need objects, let's use C++. On and on. But if you ask the kernel it all looks the same. In the end, all of our code is compiled down to something simple that the kernel can understand. And when it's working at that level all processes are treated the same. Everything gets its numeric identifier and is given equal access to the resources of the kernel. What's the point of all this jibber-jabber? Using Unix programming lets you twiddle with these knobs a little bit. It lets you do things that you can't accomplish when working at the programming language level. Unix programming is programming language agnostic. It lets you interface your Ruby script with a C program, and vice versa. It also lets you reuse its concepts across programming languages. The Unix Programming skills that you get from Ruby will be 117

just as applicable in Python, or node.js, or C. These are skills that are about programming in general.

Communication Besides the basic act of creating new processes, almost everything else we talked about was regarding communication. Following the principle of abstraction mentioned above, the kernel provides very abstract ways of communicating between processes. Using signals any two processes on the system can communicate with each other. By naming your processes you can communicate with any user who is inspecting your program on the command line. Using exit codes you can send success/failure messages to any process that's looking after your own.

Farewell, But Not Goodbye That's the end! Congratulations for making it here! Believe it or not, you now know more than most programmers about the inner workings of Unix processes. Now that you know the fundamentals you can go out apply your newfound knowledge to anything that you work on. Things are going to start making more sense for you. And the more you apply your newfound knowledge: the clearer things will become. There's no stopping you now. And we haven't even talked about networking :) We'll save that one for another edition.

118

Read the appendices at the end of this book for a look at some popular Ruby projects and how they use Unix processes to be awesome. If you have any feedback on this book, find an error or build something cool with your newfound knowledge, I'd love to hear it. Send a message to [email protected] Happy coding!

119

Chapter 21

Appendix: How Resque Manages Processes This section looks at how a popular Ruby job queue, Resque 1, effectively manages processes. Specifically it makes use of fork(2) to manage memory, not for concurrency or speed reasons.

The Architecture To understand why Resque works the way it does we need a basic understanding of how the system works. From the README: Resque is a Redis-backed library for creating background jobs, placing those jobs on multiple queues, and processing them later. The component that we're interested in is the Resque worker. Resque workers take care of the 'processing them later' part. The job of a Resque worker is to boot up, load your application environment, then connect to Redis and try to reserve any pending background jobs. When it's able to reserve one such job it works off the job, then goes back to step 1. Simple enough.

1.http://github.com/defunkt/resque#readme

120

For an application of non-trivial size one Resque worker is not enough. So it's very common to spin up multiple Resque workers in parallel to work off jobs.

Forking for Memory Management Resque workers employ fork(2) for memory management purposes. Let's have a look at the relevant bit of code and then dissect it line by line. if @child = fork srand # Reseeding procline "Forked #{@child} at #{Time.now.to_i}" Process.wait(@child) else procline "Processing #{job.queue} since #{Time.now.to_i}" perform(job, &block) exit! unless @cant_fork end

This bit of code is executed every time Resque works off a job. If you've read through the Forking chapter then you'll already be familiar with the if/ else style here. Otherwise go read it now! We'll start by looking at the code inside the parent process (ie. inside the if block). srand # Reseeding

This line is here simply because of a bug 2 in a certain patchlevel of MRI Ruby 1.8.7. 121

procline "Forked #{@child} at #{Time.now.to_i}"

procline is Resque's internal way of updating the name of the current process. Remember we noted that you can change the name of the current process using but there's not programmatic way to do it?

This is Resque's solution.

procline

$0

sets the name of the current process.

Process.wait(@child)

If you've read the chapter on you.

Process.wait

then this line of code should be familiar to

The @child variable was assigned the value of the fork call. So in the parent process that will be the child pid. This line of code tells the parent process to block until the child is finished. Now we'll look at what happens in the child process. procline "Processing #{job.queue} since #{Time.now.to_i}"

Notice that both the if and else block make a call to procline. Even though these two lines are part of the same logical construct they are being executed in two different processes. Since the process name is process-specific these two calls will set the name for the parent and child process respectively. 2.http://redmine.ruby-lang.org/issues/4338

122

perform(job, &block)

Here in the child process is where the job is actually 'performed' by Resque. exit! unless @cant_fork

Then the child process exits.

Why Bother? As mentioned in the first paragraph of this chapter, Resque isn't doing this to achieve concurrency or to make things faster. In fact, it adds an extra step to the processing of each job which makes the whole thing slower. So why go to the trouble? Why not just process job after job? Resque uses fork(2) to ensure that the memory usage of its worker processes don't bloat. Let's review what happens when a Resque worker forks and how that affects the Ruby VM. You'll recall that fork(2) creates a new process that's an exact copy of the original process. The original process, in this case, has preloaded the application environment and nothing else. So we know that after forking we'll have a new process with just the application environment loaded. Then the child process will go to the task of working off the job. This is where memory usage can go awry. The background job may require that image files are loaded into main memory for processing, or many ActiveRecord objects are fetched from the 123

database, or any other operation that requires large amounts of main memory to be used. Once the child process is finished with the job it exits, which releases all of its memory back to the OS to clean up. Then the original process can resume, once again with only the application environment loaded. So each time after a job is performed by Resque you end up back at a clean slate in terms of memory usage. This means that memory usage may spike when jobs are being worked on, but it should always come back to that nice baseline.

Doesn't the GC clean up for us? Well, yes, but it doesn't do a great job. It does an OK job. The truth is that MRI's GC has a hard time releasing memory that it doesn't need anymore. When the Ruby VM boots up it is allocated a certain block of main memory by the kernel. When it uses up all that it has it needs to ask for another block of main memory from the kernel. Due to numerous issues with Ruby's GC (naive approach, disk fragmentation) it is rare that the VM is able to release a block of memory back to the kernel. So the memory usage of a Ruby process is likely to grow over time, but not to shrink. Now Resque's approach begins to make sense! If the Resque worker simply worked off each job as it became available then it wouldn't be able to maintain that nice baseline level of memory usage. As soon as it worked on a job that required lots of main memory then that memory would be stuck with the worker process until it exited. 124

Even if subsequent jobs needed much less memory Ruby would have a hard time giving that memory back to the kernel. Hence, the worker processes would inevitably get bigger over time. Never shrinking. Thanks to the power of fork(2) Resque workers are reliable and don't need to be restarted after working a certain number of jobs.

125

Chapter 22

Appendix: How Unicorn Reaps Worker Processes Any investigation of Unix Programming in the Ruby language would be remiss without many mentions of the Unicorn web server 1. Indeed, the project has already been mentioned several times in this book. What's the big deal? Unicorn is a web server that attempts to push as much responsibility onto the kernel as it can. It uses lots of Unix Programming. The codebase is chock full of Unix Programming techniques. Not only that, but it's performant and reliable. It's used by lots of big Ruby websites like Github and Shopify. The point is, if this book has whet your appetite and you want to learn more about Unix Programming in Ruby you should plumb the depths of Unicorn. It may take you several trips into the belly of the mythical beast but you will come out with better understanding and new ideas.

Reaping What? Before we dive into the code I'd like to provide a bit of context about how Unicorn works. At a very high level Unicorn is a pre-forking web server. 1.http://unicorn.bogomips.org

126

This means that you boot it up and tell it how many worker processes you would like it to have. It starts by initializing its network sockets and loading your application. Then it uses fork(2) to create the worker processes. It uses the master-worker pattern we mentioned in the chapter on forking. The Unicorn master process keep a heartbeat on each of its workers and ensures they're not taking too long to process requests. The code below is used when you tell the Unicorn master process to exit. As we covered in chapter (Forking) if a parent process doesn't kill its children before it exits they will continue on without stopping. So it's important that Unicorn clean up after itself before it exits. The code below is invoked as part of Unicorn's exit procedure. Before invoking this code it will send a QUIT signal to each of its worker process, instructing it to exit gracefully. The code below is used by Unicorn to clean up its internal representation of its workers and ensure that they all exited properly. Let's dive in.

127

# reaps all unreaped workers def reap_all_workers begin wpid, status = Process.waitpid2(-1, Process::WNOHANG) wpid or return if reexec_pid == wpid logger.error "reaped #{status.inspect} exec()-ed" self.reexec_pid = 0 self.pid = pid.chomp('.oldbin') if pid proc_name 'master' else worker = WORKERS.delete(wpid) and worker.close rescue nil m = "reaped #{status.inspect} worker=#{worker.nr rescue 'unknown'}" status.success? ? logger.info(m) : logger.error(m) end rescue Errno::ECHILD break end while true end

We'll take it one line at a time: begin ... end while true

The first thing that I want to draw your attention to is the fact that the begin block that's started on the first line of this method actually starts an endless loop. There are others ways to write endless loops in Ruby, but alas, we should keep in mind that we're

128

in an endless loop so we'll need a hard method.

return

or a

break

in order to finish this

wpid, status = Process.waitpid2(-1, Process::WNOHANG)

This line should have some familiarity. We looked at Process.waitpid2 in the chapter on Process.wait , but we always passed in a pid as the first option and never passed anything as the second option. So we saw that passing a valid pid as the first option would cause the Process.waitpid call to wait only for that pid. What happens when you pass -1 to Process.waitpid ? We know that there are no processes with a pid less than 1, so... Passing -1 waits for any child process to exit. It turns out that this is the default option to that method. If you don't specify a pid then it uses -1 by default. In this case, since the author needed to pass something in for the second argument, the first argument couldn't be left blank, so it was set to the default. Hey, if you're waiting on any child process why not use Process.wait2 then? I suspect that the author decided here, and I agree with him, that it was most readable to use a waitpid variation when specifying a value for the pid. As mentioned above the value specified is simply the default, but nonetheless it's most salient to use waitpid if you're specifying any value for the pid. The second argument is for special flags. Passing Process::WNOHANG causes this normally blocking call to become a non-blocking call. When using this flag if there are no processes that have exited for us then it will not block and simply return nil.

129

wpid or return

This line may look a little odd but it's actually a conditional return statement. If wpid is nil then we know that the last line returned nil . This would mean that there are no child processes that have exited returning their status to us. If this is the case then this method will return and its job is done. if reexec_pid == wpid logger.error "reaped #{status.inspect} exec()-ed" self.reexec_pid = 0 self.pid = pid.chomp('.oldbin') if pid proc_name 'master'

I don't want to spend much time talking about this bit. The 'reexec' stuff has to do with Unicorn internals, specifically how it handles zero-downtime restarts. Perhaps I can cover that process in a future report. One thing that I will draw your attention to is the call to proc_name . This is similar to the procline method from the Resque chapter. Unicorn also has a method for changing the display name of the current process. A critical piece of communication with the user of your software. else worker = WORKERS.delete(wpid) and worker.close rescue nil

130

Unicorn stores a list of currently active worker processes in its WORKERS constant. WORKERS is a hash where the key is the pid of the worker process and the value is an instance of Unicorn::Worker . So this line removes the worker process from Unicorn's internal tracking list ( WORKERS ) and calls #close on the worker instance, which closes its no longer needed heartbeat mechanism. m = "reaped #{status.inspect} worker=#{worker.nr rescue 'unknown'}"

This lines craft a log message based on the call.

status

returned from the

Process.waitpid2

The string is crafted by first inspecting the Something like this:

status

variable. What does that look like?

# # or #

It includes the pid of the ended process, as well as the way it ended. In the first line the process exited itself with an exit code of 0. In the second line the process was killed with a signal, SIGINT in this case. So a line like that will be added to the Unicorn log. The second part of the log line worker's number.

worker.nr

is Unicorn's internal representation of the

131

status.success? ? logger.info(m) : logger.error(m)

This line takes the crafted log message and sends it to the logger. It uses the success? method on the status object to log this message as at the INFO level or the ERROR level. The success? method will only return true in one case, when the process exited with an exit code of 0. If it exited with a different code it will return false . If it was killed by a signal, it will return nil . rescue Errno::ECHILD break

This is part of the top-level begin statement in this method. If this exception is raised then the endless loop that is this method break s and it will return. The Errno::ECHILD exception will be raised by Process.waitpid2 (or any of its cousins) if there are no child processes for the current processes. If that happens in this case then it means the job of this method is done! All of the child processes have been reaped. So it returns.

Conclusion If this bit of code interested you and you want to learn more about Unix Programming in Ruby, Unicorn is a great resource. See the official site at http://unicorn.bogomips.org and go learn! 132

Chapter 23

Appendix: Preforking Servers I'm glad you made it this far because this chapter may be the most action-packed in the whole book. Preforking servers bring together a lot of the concepts that are explained in this book into a powerful, highly-efficient approach to solving certain problems. There's a good chance that you've used either Phusion Passenger 1 or Unicorn 2. Both of those servers, and Spyglass (the web server included with this book), are examples of preforking servers. At the core of all these projects is the preforking model. There are a few things about preforking that make it special, here are 3: 1. Efficient use of memory. 2. Efficieng load balancing. 3. Efficient sysadminning. We'll look at each in turn.

1.http://www.modrails.com/ 2.http://unicorn.bogomips.org

133

1. Efficient use of memory In the chapter on forking we discussed how fork(2) creates a new process that's an exact copy of the calling (parent) process. This includes anything that the parent process had in memory at the time.

Loading a Rails App On my Macbook Pro loading only Rails 3.1 (no libraries or application code) takes in the neighbourhood of 3 seconds. After loading Rails the process is consuming about 70MB of memory. Whether or not these numbers are exactly the same on your machine isn't significant for our purposes. I'll be referring to these as a baseline in the following examples.

Preforking uses memory more efficiently than does spawning multiple unrelated processes. For comparison, this is like running Unicorn with 10 worker processes compared to running 10 instances of Mongrel (a non-preforking server). Let's review what will happen from the standpoint of processes, first looking at Mongrel, then at Unicorn, when we boot up 10 instances of each server.

134

Many Mongrels Booting up 10 Mongrel processes in parallel will look about the same as booting up 10 Mongrel processes serially. When booting them in parallel all 10 processes will be competing for resources from the kernel. Each will be consuming resources to load Rails, and each can be expected to take the customary 3 seconds to boot. In total, that's 30 seconds. On top of that, each process will be consuming 70MB of memory once Rails has been loaded. In total, that's 700MB of memory for 10 processes. A preforking server can do better.

Many Unicorn Booting up 10 Unicorn workers will make use of 11 processes. One process will be the master, babysitting the other worker processes, of which there are 10. When booting Unicorn only one process, the master process, will load Rails. There won't be competition for kernel resources. The master process will take the customary 3 seconds to load, and forking 10 processes will be more-or-less instantaneous. The master process will be consuming 70MB of memory to load Rails and, thanks to copy-on-write, the child processes should not be using any memory on top of what the master was using.

135

The truth is that it does take some time to fork a process (it's not instantaneous) and that there is some memory overhead for each child process. These values are negligible compared to the overhead of booting many Mongrels. Preforking wins.

Keep in mind that the benefits of copy-on-write are forfeited if you're running MRI. To reap these benefits you need to be using REE.

2. Efficient load balancing I already highlighted the fact that fork(2) creates an exacty copy of the calling process. This includes any file descriptors that the parent process has open.

The Very Basics of Sockets Efficient load balancing has a lot to do with how sockets work. Since we're talking about web servers: sockets are important. They're at the very core of networking. As I hinted earlier: sockets and networking are a complex topic, too big to fit into this book. But you need to understand the very basic workflow in order to understand this next part. Using a socket involves multiple steps: 1) A socket is opened and binds to a unique port, 2) A connection is accepted on that socket using accept(2), and 3) Data can

136

be read from this connection, written to the connection, and ultimately the connection is closed. The socket stays open, but the connection is closed.

Typically this would happen in the same process. A socket is opened, then the process waits for connections on that socket. The connection is handled, closed, and the loop starts over again. Preforking servers use a different workflow to let the kernel balance heavy load across the socket. Let's look at how that's done. In servers like Unicorn and Spyglass the first thing that the master process does is open the socket, before even loading the Rails app. This is the socket that is available for external connections from web clients. But the master process does not accept connections. Thanks to the way fork(2) works, when the master process forks worker processes each one gets a copy of the open socket. This is where the magic happens. Each worker process has an exact copy of the open socket, and each worker process attempts to accept connections on that socket using accept(2). This is where the kernel takes over and balances load across the 10 copies of the socket. It ensures that one, and only one, process can accept each individual connection. Even under heavy load the kernel ensures that the load is balanced and that only one process handles each connection. Compare this to how Mongrel achieves load balancing.

137

Given 10 unrelated processes that aren't sharing a socket each one must bind to a unique port. Now a piece of infrastructure must sit in front of all of the Mongrel processes. It must know which port each Mongrel processes is bound to, and it must do the job of making sure that each Mongrel is handling only one connection at a time and that connections are load balanced properly. Again, preforking wins both for simplicity and resource efficiency.

3. Efficient sysadminning This point is less technical, more human-centric. As someone administering a preforking server you typically only need to issue commands (usually signals) to the master process. It will handle keeping track of and relaying messages to its worker processes. When administering many instances of a non-preforking server the sysadmin must keep track of each instance, adminster them separately and ensure that their commands are followed.

Basic Example of a Preforking Server What follows is some really basic code for a preforking server. It can respond to requests in parallel using multiple processes and will leverage the kernel for load balancing. For a more involved example of a preforking server I suggest you check out the Spyglass source code (next chapter) or the Unicorn source code.

138

require 'socket'

# Open a socket. socket = TCPServer.open('0.0.0.0', 8080) # Preload app code. # require 'config/environment' # Forward any relevant signals to the child processes. [:INT, :QUIT].each do |signal| Signal.trap(signal) { wpids.each { |wpid| Process.kill(signal, wpid) } } end # For keeping track of child process pids. wpids = [] 5.times { wpids
View more...

Comments

Copyright © 2017 KUPDF Inc.
SUPPORT KUPDF