MMI 3G Map Installation

September 14, 2017 | Author: Pascual Hilario Re | Category: Booting, Computer Architecture, System Software, Technology, Software
Share Embed Donate


Short Description

Download MMI 3G Map Installation...

Description

MMI 3G MAP Update Version 1.2 – Q1 2014 (by KG)

Step Instructions 1. Switch on the MMI 3G. 2. Enter the green menu (First press Setup and then CAR and hold both buttons down simultaneously for approx. five seconds until the display changes.)

3.

Green Menu should come up

4.

Go to Nav  database update And Press on “Delete Nav HDD partition” Once partition is deleted, please reboot MMI using the following key combination:

5.

6.

Once MMI is rebooted, Enter the green menu again (First press Setup and then CAR and hold both buttons down simultaneously for approx. five seconds until the display changes.)

7.

Go to Nav  database update And Change your “Active HDD Nab DB” to the region/country of your choice.

8. 9. 10.

Quit the green menu by pressing Navigation button on the key board. Insert the MAP SD card I have sent you into the MMI unit slot SD 1. First press Setup and then Return and hold both buttons down simultaneously for approx. five seconds until the display changes.

Note only: You can quit the software download process at any time by simultaneously pressing and holding the Tone and Back buttons for more than five seconds. 11. 12.

Press Update (this is the bottom right hand corner button in the MMI’s key board Choose SD 1

13.

Please wait until reading is done.

14.

Choose ROW 5.5.6 (MMI 3G)

15. 16.

Waiting until reading Metainfo is finished… (it does take long time) Choose “Standard”

NOTE: Ensure that there is no voltage changes of the vehicle's battery, i.e. don't Switch off and on anything, Don't open and close doors or windows etc... Diagnostic tests using the tester/other operations may not be performed in parallel. Switch off all unnecessary electrical equipment (auto/daytime running lights, air-conditioning etc.) in the vehicle and leave it switched off throughout the update. 17. 18.

19.

Scroll down and Press “Start download” and then “Start” Please wait... Once the system has rebooted, the download application may show a screen that displays the update progress of various devices. As soon as all devices have registered with the download application, the update process is activated and the progress is shown on screen. The system may reboot many times during the update and programming session. This is carried out completely automatically and does not require you to take any action. Once the system has rebooted, updating is continued and the "Download progress" screen is displayed many times. Programming success is displayed in the subsequent overview screen.

20. 21. 22.

Scroll down and select "Continue". Select “Aboard Documentation” Once MMI is rebooted for the final time, you’re now ready for your Map Activation.

View more...

Comments

Copyright © 2017 KUPDF Inc.
SUPPORT KUPDF